Installation Manual

NÜO PASS Manual
Installation
6
NÜO PASS Installation on built walls
1) Remove the front panel using the suction
cup provided. The panel will be easier to
remove if the suction cup is placed in a corner.
2) Unscrew the ush mount support.
3) Using a level, make a hole in the wall with
the dimensions detailed in the diagram. Pass
the connecting cable through and grout the
hole.
4) Insert the ush mount support and pass the
cable through one of the holes, then connect
the assembly.
128
50
68
Plaster
5) Tighten the screws, fastening the assembly
to the ush mount base.
6) Place the front panel.
128 x 68 x 50 mm
-- INSTALLATION ON BUILT WALLS:
-- STEPS PRIOR TO INSTALLATION: