User's Manual

Installation
6
NÜO SWIP Manual
Wall mounting
1) Anchor the base piece to the wall using
the screws and wall plugs provided. Make an
opening for the cable.
2) Pass the reader connection cable through
the hole in the base piece.
X
X
X
X
The head of the gure in the drawing should be
pointing upwards.
Recommended height for installation: 1.2 - 1.5 m.
3) Place the reader by inclining it at an angle of
about 45 °C for the tabs on the base to hook
together.
4) Screw the lower part using an allen key to
secure it.
- TERMINAL MOUNTING: