User's Manual

Introduction
4
NÜO SWIP Manual
NÜO SWIP Technical Specications
TECHNICAL SPECIFICATIONS
NÜO SWIP:
INPUT VOLTAGE 24VDC (11 - 28 VDC)
MAXIMUM POWER 2 W without lock - 8 W lock activated
READING DISTANCE 3 - 5 cm
FINGERPRINT SENSOR TYPE Capacitive sensor
SENSOR RESOLUTION 508 dpi
MAX. NO. FINGERPRINTS 100 Fingerprints
COMMUNICATIONS
BYBUS RS-485
By Protocol: BYBUS high security communications.
INPUTS 1 Door sensor input
OUTPUTS 1 lock control output with 24 VDC power supply (250 mA maximum)
ILLUMINATION
Automatically regulated according to environmental lighting
conditions.
Colours according to status:
- Red/White: Terminal oine.
- Degraded Red/Pink: Terminal in card enrolment mode.
- Flashing blue: Terminal in rmware update mode.
- Blue: Normal security level.
- Purple: High security level.
- Light pink: Very high security level.
- Flashing yellow: Connected but not congured.
- Green: Access granted or Unrestricted.
- Red: Access denied or Door blocked.
- White: Card or ngerprint identication operation.
- Flashing white: Fingerprint enrolment.
- Green/Yellow: Door in emergency mode.
AUDIO
Dierentiated sound indicators for granted and denied access with
two volume levels.
MATERIALS
Manufactured in high-quality, wear-resistant polycarbonate with
antibacterial treatment.
INSTALLATION Surface mounted
OPERATING TEMPERATURE -10 °C to 50 °C
DIMENSIONS 130 x 50 x 36 mm (height x width x depth)