User's Manual

NÜO Surf Manual
Installation
6
NÜO SURF Surface mounted
1) Anchor base to wall, levelled. To do this,
mark the location of support holes and drill at
the diameter corresponding to the wall plugs
provided. Do not forget to pass the power and
communication cables through:
2) Pass the reader connection cable through
the hole made for such purpose:
X
X
X
X
The head of the gure in the drawing
should be pointing up.
Recommended height for installation is
between 1.2 and 1.5 m.
3) Angle the reader at about 45 °C to t the
tab in the upper part of the reader into the wall
base:
4) Place the reader wholly within its base and
set the anchoring screw located in the lower
part: