User Guide

ManualsBrandsby Microsoft ManualsAccessoriesXbox One Stereo Headset

Set up the Xbox One Stereo Headset

Follow these steps to ready your Xbox One Stereo Headset for use with your console.

Note To use the Xbox One Stereo Headset on another device, such as a Windows phone, just

plug the headset’s 3.5-mm cable into a device that has a 3.5-mm audio jack.

1. Follow the steps at Update your Xbox One Controller to use the Stereo Headset Adapter to

make sure your controller is ready to work with the Stereo Headset Adapter.

2. To install the Xbox One Stereo Headset, first insert the Stereo Headset Adapter into the

rectangular expansion port on the bottom of the controller. Then, insert the 3.5-mm audio plug

attached to the Stereo Headset into the bottom of the Headset Adapter.

3. Adjust the fit of the Stereo Headset. You can adjust the size by moving each side of the headset

to the left or right. Each side adjusts about 1.5 inches, which should accommodate most head

sizes. Don’t force the headset to adjust farther than that, or the headset could break.

Summary of content (4 pages)

PAGE 1
Set up the Xbox One Stereo Headset Follow these steps to ready your Xbox One Stereo Headset for use with your console. Note To use the Xbox One Stereo Headset on another device, such as a Windows phone, just plug the headset’s 3.5-mm cable into a device that has a 3.5-mm audio jack. 1. Follow the steps at Update your Xbox One Controller to use the Stereo Headset Adapter to make sure your controller is ready to work with the Stereo Headset Adapter. 2.
PAGE 2
4. Adjust the position of the chat microphone. Gently pull up or down on the microphone boom on the left ear piece arm until the microphone is in front of your mouth. You can also adjust the microphone in and out slightly so it’s the optimal distance from your mouth. Use the Xbox One Stereo Headset This section describes how to use the buttons on the Xbox One Stereo Adapter to control your Stereo Headset.
PAGE 3
Xbox One Stereo Headset Adapter buttons Game/Chat balance: The two buttons on the left side of the Stereo Headset Adapter adjust the mix of game audio versus chat audio. At default, the mix is 50/50, but you can adjust it to anywhere from 100/0 to 0/100. For example, if you want more game volume than chat volume, press the top button with the controller icon until you reach the level you want. A tone will sound when you have reached 100 percent.
PAGE 4
     Have you updated your controller’s software to support the Stereo Headset Adapter? Make sure your controller has fresh batteries. When the batteries get weak, some controller functions, such as audio and rumble, are turned off to conserve the remaining power. Make sure your Headset Adapter is firmly plugged into your controller and that your Stereo Headset’s 3.5-mm cable is securely plugged into the Headset Adapter.