Installation Guide

COMPONENT
U
P
C
C
R
Plumbing Fixture Fittings-components
Product:
-Rev.3/7/2018-
Void After: March 2019
File No. MC-8435
Hain Yo Enterprises Co, Ltd
Issued To:
2 3
IAPMO RESEARCH AND TESTING, INC.
500 East Philadelphia Street, Ontario, California 91761-2816-USA909-472-4100909-472-4244 wwwiapmort org
CERTIFICATE OF LISTING
The most updated information on this Certificate of Listing is available online at pld. iapmo. org
March 2018
-Rev.3/7/2018-
Void After: March 2019
Plumbing Fixture Fittings-Components
File No. MC-8435
Hain Yo Enterprises Co, Ltd
No. 102, Tien Tung Rd., Ho-mei
Gravity, IA 50848
COMPONENT
U
P
C
C
R
Effective Date:
Product:
Issued To:
Characteristics: plumbing fixture fitting components to be installed in accordance with the manufacturers instructions
and the requirements of the latest edition of the Uniform Plumbing Code
Products listed on this certificate have been tested by an IAPMO R&Trecognized laboratory. This
recognition has been granted based upon the laboratorys compliance to the applicable requirements
of ISO/lEC 17025
Products are in compliance with the following standard(s):
ASME A112.18.1-2012/CSA B125.1-12
ldentification:
Chairman, Product Certification Committee
CEO. The IAPMO Group
IAPMO Research and Testing Inc. is a product certification body which tests and inspects samples taken from the supplier's
stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards.
This activity is coupled with periodic surveillance of the supplier's factory and warehouses as well as the assessment of the
supplier's Quality Assurance System. This listing is subject to the conditions set forth in the characteristics below and is not
to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing. Inc. of the product
acceptance by Authorities Having Jurisdiction
Each fitting component shall bear permanent legible markings to identify the
manufacturer. This marking shall be the trade name, trademark, or other mark known to identify
the manufacturer. The product shall also bear all other markings required by the standard.
The marking shall be applied so as to be visible after installation. The product or packaging
shall also bear the cUPC R certification mark along with the term"COMPONENT above
This listing period is based upon the last date of the month indicated on the Effective Date and Void After Date shown above.
Any change in material, manufacturing process, marking or design without having first obtained the approval of the Product
Certification Committee, or any evidence of non-compliance with applicable codes and standards or of inferior workmanship,
may be deemed sufficient cause for revocation of this listing. Production of or reference to this form for advertising purposes may
be made only by specific written permission of lAPMO Research and Testing, Inc. Any alteration of this certificate could be grounds for
revocation of the listing. This document shall be reproduced in its entirety
CERTIFICATE OF LISTING
IAPMO RESEARCH AND TESTING, INC.