User Manual

WWW.GASMONITORS.COM LOCAXION ANChOR OpeRATOR MANuAL | 13
Operator Manual
Agency Approval Marks
Mark Description
The Canadian Standards mark means that the equipment has been tested and
meets applicable standards for safety and/or performance�
Class I, Division 2, Groups A, B� C & D
Class I, Zone 2, AEx nA IIC
Type 4X and IP64�
The Conformité Européenne (CE) mark means that the radio equipment used in
the European Union is in accordance with the R&TTE Directive� The CE Mark and
the Notified Body (NB)identification number are used when the NB is involved
in theconformity assessment procedure� The alert sign should be usedwhen a
restriction on use (output power limit by a country atcertain frequencies) applies to
the equipment and should followthe CE marking�
R&TTE Directive 1999/5/EC
EMC Directive 2004/108/EC
LVD Directive 73/23/EEC
GP design guidelines EN 61010-1,Pollution degree 2
The Ex mark means that the equipment complies with the requirements of the
European standards that are harmonized with the 94/9/EC Directive and that
the equipment and protective systems can be used in potentially explosive
atmospheres�
CMRI & SA : Ex nA IIC
The FCC mark means that the equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules�
FCC Part 15 Subpart B
FCC Part 15 Subpart C
FCC Part 15 Subpart E
The C-Check mark means that it is a certification trade mark registered to
Australian Communications and Media Authority (ACMA) in Australia under the
Trade Marks Act 1995 and to RSM in New Zealand under section 47 of the NZ
Trade Marks Act� The mark is only to be used in accordance with conditions
laid down by ACMA and RSM� This mark is equal to the CE Mark used in the
European Union�
AS NZS 4771-2000
The IC mark means that the wireless radio of the device complies with RSS 210
Industry Canada� The Class B digital complies with Canadian ICES-003�
RSS-210, Issue 6 and RSS-en, Issue 1
ACMA: AS NZS 4771-2000
The European Telecommunications Standards Institue (ETSI) mark means that
the device complies with the European Telecommunications Standards�
Emissions Specification and Method: EN 300 328 V1�7�1
Immunity Specification: EN 301 489-17 V2�1�1
Immunity Method: EN 301 489-1 V1�8�1
Product Standard: IEC61326-1