User Manual

ImpactXtreme Operator’s Manual 8 March 2013

Sensor enable/disable, calibration gas values, calibration interval, calibration reminder,
bump test interval, bump threshold, bump response time, alarm setpoints
(low/high/TWA/STEL), STEL interval, TWA period, auto zero at startup enable/disable,
LEL correction factor, low alarm acknowledge, %vol methane measurement, VOC
correction factor, mg/m3 enable/disable, target flammable gas, target flammable
calibration gas
Year of Manufacture

The detector’s year of manufacture is determined from the serial number. The tenth
and eleventh characters in the serial number determines the year of manufacture.

For example: 1234IXS__130100001 = 2013 year of manufacture
Alkaline Battery Pack and Batteries
Approved Alkaline Battery Pack <part #>

From Quattro: As per standards UL913, EN60079-11, EN60079-0, EC 60079-0, IEC
60079-11, C22.2 No. 157
Approved Alkaline Batteries

Energizer E91 -20

C ≤ Ta ≤ +55

C T4 (129.9

C)
AA Alkaline Battery Operating Time

8 hours at 20

C (68

F) in fully-charged condition.
Rechargeable Battery Pack and Lithium Battery
Approved Lithium Battery for ImpactXtreme
Narada NL 662485H-3P
Rechargeable Battery (part number)
IX-BAT-R1
Lithium Battery Operating Time

9 hours at 20

C (68

F) in fully-charged condition. Run time may decrease over 300
charge cycles, or two years of normal use.
Battery Charger
ImpactXtreme Cradle Charger
First-time Charge
6 hours
Normal Charge