User Manual

ImpactXtreme Operator’s Manual 8 March 2013
User Options and Settings
User options and detector configuration settings are managed through FleetManager II software.
Visit www.gasmonitors.com to download FleetManager II.
This section describes some of the user options and configuration settings available for the
ImpactXtreme detector through FleetManager II software. For more information, refer to the
FleetManager II Operator Manual and the ImpactXtreme Technical Reference Guide.
Before you Begin
Have ready the following items:
1. Computer with FleetManager II software installed.
2. Detector
3. Cradle Charger or IR Adapter <model number needed>, plus compatible USB cable
Getting Started
1. Activate the computer. Start the FleetManager II software program, and login as an
Administrator.
2. Connect the transfer device to computer.
a. If you are using an IR Adapter, attach it to the USB cable. Then, connect the
USB cable to the computer. Activate the detector, and place it close to the IR
Adapter.
b. If you are using a Cradle Charger, ensure that it is connected to a power supply
and the red power LED is lit. Attach the Cradle Charger to the USB cable. Then,
connect the USB cable to the computer. Insert the detector.
3. Choose Configure Device via IR Link from the Devices menu.
4. Select ImpactXtreme from the Device Selection menu. When the Device Configuration
Selection window opens, select a configuration file to open:
a. Choose From default file to load factory default settings for a specific country
or region.
b. Choose From existing file to load a settings file that you have saved on your
computer or network.
c. Choose From connected device to retrieve the settings from the detector that is
connected to the computer.
General Settings