User Manual

ImpactXtreme Operator’s Manual 8 March 2013
b) Lift the battery pack from the casing.
c) Do not use screwdrivers or other tools to press the battery latch, or pry the battery pack
from the casing.
Insert the Alkaline Battery Pack
1) Insert the battery pack into the detector and tighten the four screws.
2) Place thumbs on either side of the battery latch and press firmly to lock the battery into
position and ensure ingress protection.
Replace Spent Alkaline Batteries
Before you begin
1) Have ready the screwdriver with double-ended bit (Phillips and hex) provided.
2) Have ready 4 replacement AA batteries. Use only batteries recommended by BW
Technologies by Honeywell. For more information, see Specifications.
3) Move to an area that is known to be non-hazardous.
Related Topics
1) Specifications
2) Remove and Insert the Alkaline Battery Pack
Replace Spent Alkaline Batteries
1) Remove the battery pack. For more information, see Remove and Insert the Alkaline Battery
Pack.