User Manual

ImpactXtreme Operator’s Manual 8 March 2013
Alkaline Battery Pack
The alkaline battery pack holds 4 AA batteries. Use only batteries recommended by BW
Technologies by Honeywell. For more information, see Specifications.
Change alkaline batteries only in an area that is known to be non-hazardous.
Only use batteries recommended by BW Technologies by Honeywell. Refer to
Specifications for manufacturers and model numbers.
Use only new AA batteries. Do not recharge spent batteries.
Do not use batteries if they are damaged in any way.
Change alkaline batteries only in an area that is known to be non-hazardous.
Remove and Insert the Alkaline Battery Pack
Before you begin
1) Have ready the screwdriver with double-ended bit (Phillips and hex) provided.
2) Move to an area that is known to be non-hazardous.
Remove the Alkaline Battery Pack
1) In normal operating mode, press and hold for 3 seconds to deactivate the detector.
2) Loosen the 4 screws that secure the battery pack to the detector.
3) Gently remove the battery pack from the detector.
a) Press battery latch against outside edge of detector shell.