User Manual

ImpactXtreme Operator’s Manual 8 March 2013
Icon
Meaning
Last calibration successful.
Calibration over due.
Last bump test successful.
Bump Test overdue.
Heartbeat (animated).
Fault acknowledged but still exists.
Warning acknowledged but still exists
Battery charging.
Low battery warning / critical low battery
Log memory full.
Wireless model only
Wireless connection established. Wi-Fi module enabled.
Wireless model only
Wireless connection not established. Wi-Fi module disabled.
Wireless model only.
Animated. Scanning Wireless network.
Wireless model only
Wireless signal strength.
Wireless model only
Satellite found.
Wireless model only
Satellite not found. GPS module disabled.
Wireless model only
Animated. Scanning GPS satellite.
LCD Backlight
The LCD backlight changes color to indicate a change in detector status. Green is the default
backlight color. During normal operation, the LCD backlight is inactive. Press any button to
activate the backlight for ten seconds.
Detector Status
Backlight
Description
Activate
Multi-color
flash
When the detector is activated, the backlight displays
multiple colors to verify performance.
Start-up and self-test
Green
During startup and self-test procedures, the backlight
is green.
Normal operation
Inactive
During normal operation, the backlight is inactive.
Press any button to activate the backlight for ten
seconds.
Critical system fault
Red
When a critical system fault occurs, the backlight