User's Manual

ConneX1 Operator’s Manual
20

6. Panic Alarm
When Panic Alarm is activated, the detector activates the LEDs and audible
alarm to maximum volume to alert nearby personnel for help. The detector sends
a message to LocaXion Manager so the operator can send assistance. The
detector will continue to send a message to LocaXion Manager until the operator
acknowledges that the message has been received. LocaXion Manager cannot
be operated until the message has been acknowledged.
To enter Panic Mode, press and hold
for 3 seconds.
To activate the Panic Alarm, press and hold
for 2 seconds. This will prompt the
Panic Alarm warning. Continue to hold
for 3 more seconds to activate the alarm.
Follow the same procedure to deactivate the alarm.
5.1 
If the Mandown Alarm needs to be temporarily disabled, press and hold and
. The detector will flash, beep, and vibrate once to indicate Break Mode is active.
The LCD indicates that Break Mode is active.
Break Mode will deactivate after 30 minutes.