User's Manual

ConneX1 Operator’s Manual
11

18. If the startup summary is error-free, the screen displays that the startup
sequence is finished. The detector then enters normal operation.
3. Installing Fleet Manager II
Fleet Manager II is required to configure the detector. To install Fleet Manager II,
refer to the Fleet Manager II CD-ROM that includes the
s installation wizard, and
s Fleet Manager II Operator’s Manual (located under Help)
3.1 
Detector
To install Fleet Manager, refer to the Fleet Manager II
1
2
3
4
Figure 2. Connecting the IR Link
Table 4. Connecting the IR Link
Item Description
1 
2 
3 
4 