User's Manual

ConneX1 Operator’s Manual
1
Intended Use
1. Introduction
The ConneX1 is a compact, portable gas detector designed to be carried or worn
without hindering the user. Its purpose is to continuously monitor the atmosphere
continuously for hazardous levels. Audible, visual, and vibratory alarms alert the
user to danger when hazardous conditions are detected.
1.1 Intended Use
The ConneX1 has been designed to alert the user to potentially hazardous
atmospheres while carrying out his/her normal duties. Therefore, the detector
must be kept switched on and worn as close to the breathing area as possible,
and several accessories are provided to allow the detector to be worn in a number
of different ways:
a. On the chest
b. On a belt
The detector is provided with various methods to enable the user to comply safely
and easily with confined space regulations.
CAUTION
BW recommends that the detector be calibrated at least every 6
months or in accordance with customer site procedures, whichever

test gas of known concentration before each use.
The use of the IntelliDoX accessory is strongly recommended as it
enables a calibration to be performed quickly and easily.
WARNING
A sensor which cannot be calibrated or which is found to be out of
tolerance should be replaced immediately.