Specifications

Managing presets

mANAGING PRESETS (FRONT PANEl CONTROl)

The DSPXtreme has an assortment of factory presets and provision for 16 user ones. While the factory presets

may not suit your tastes you will generally find one that serves as a good starting point in creating your own cus-

tom preset. The preset facilities of the DSPXtreme are accessed from the main screen by pressing the disc icon

on the left side of the touch-screen.

Selecting a preset.

Factory presets are prefixed with Fx where x is a number. User presets are prefixed with Ux where x is a number

between 1 and 8. Once you have selected the preset you want to load you simply press the 'LOAD' button on

the bottom of the screen. You can audition various presets by simply scrolling through the preset list and hitting

'LOAD' over each one you wish to listen to.

Comparing a preset

When making processing adjustments it is often desirable to compare against the preset you are adjusting. For

example you may wish to modify a factory preset and save it as a user preset. You select a factory preset and

load it, making it active. You like the factory preset but want to increase the bass slightly and possibly reduce the

drive into the main clipper to reduce distortion. You could modify both processing parameters and then press the

'LOAD' button. Now pressing the 'B 'button will reload the saved preset allowing you to compare before and after

your changes. The 'A’ button will return you to the adjusted preset. The other option you have if is the 'LOAD'

button, reloading the saved preset and discarding your changes. This way you can easily make processing

adjustments quickly and hear instantly if the change is to your liking. It is very easy to forget where you are soni-

cally so the comparison feature is very useful. You can also use the facility to make one processing parameter

change at a time, adjusting it, discarding it or saving it to the preset. You can then repeat the comparison proc-

ess until you are happy with all of your processing changes.

Saving a preset

To save the current active settings to a user preset you simply select the position you want to save the pre-

set and then press the 'SAVE' button on the bottom of the touch-screen. The new preset will be saved to the

DSPXtreme's memor. You can then name the preset by pressing the 'RENAME' button and enetering the name

of your preset on the on-screen keyborad.

Exporting a preset to a PC

This is handled by the remote control application.

Importing a preset from a PC

This is handled by the remote control application.

To enter preset menu, press the disc icon