Specifications

Setting Up The Processing
33
some of the harmonics which might result in slight increase of overshoots, depending on how much composite
clipping you are using. Therefore you might need to re-adjust the output level to keep modulation peaks below
75 kHz (100% modulation) when the filter is activated.
Auditioning individual stages of the DSPXtreme processing
When setting up the DSPXtreme it is sometimes useful to hear the effects of the adjustments on that particular
processing stage. By setting the other processing blocks up in a certain way you can make it easier to hear the
effects of the one you are adjusting.
For example, to listen to just the action of the multi-band limiters back down the multi-band and final clipper
drives. To hear just the clippers do the same but raise the limiter thresholds to +6dB and back the drive down
into the limiters to -6dB. You can then up the drive into the clippers with the clipper drive controls and mixer con-
trols to here just the clippers working.