P1201-M0 rev 112011 Hand Pumps Instruction Manual MODELS: P1201, P1201S, P2301, P2301M & P4301 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 * Fax: 816-891-6599 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com ! This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
SAFETY AND GENERAL INFORMATION Save these instructions. For your safety, read and understand the information contained within. The owner and operator shall have an understanding of this product and safe operating procedures before attempting to use this product. Instructions and safety information shall be conveyed in operator’s native language before use of this product is authorized.
SPECIFICATIONS Model P1201S Usable Oil Oil Capacity Capacity (in3) (in3) 67 73 Pump Type Pressure Rating (psi) 1st 2nd stage stage Oil DisplaceMounting ment per Stoke Operating Plate (in3) Holes Force (lb) Distance 1st 2nd (in) stage stage Singlespeed 0.13 89 P1201 P2301 P2301M P4301 128 140 250 262 Twospeed 10,000 200 0.81 0.14 99 Pump Size (L x W x H) Net Weight (lb) 3.74 22 1/4” x 5 3/8” x 6 1/2” 20.0 3.74 22 1/4” x 5 3/8” x 6 3/4” 20.3 3.54 24” x 5 3/8” x 6 3/4” 27.5 3.
BEFORE USE 1. Before using this product, read the instruction manual completely and familiarize yourself thoroughly with the product, its components and recognize the hazards associated with its use. 2. Verify that the product and the application are compatible. Inspect before each use. Do not use if bent, broken, leaking or damaged components are noted. 3. Replace worn or damaged parts and assemblies with BVA Hydraulics Authorized Replacement Parts only (See Replacement Parts Section).
OPERATION ! For models P1201, P1201S, P2301 & P4301: A. Close release valve by turning it clockwise. Finger tight ONLY. Using tools on release valve can damage it and cause the pump to malfunction. B. Pump handle until desired pressure, load or position is reached. C. Pressure will maintain until the release valve is opened. D. To retract application, turn the release valve knob slowly counterclockwise (never more than 2 full turns).
MAINTENANCE Changing Hydraulic Fluid For best results, change fluid once a year. 1. Remove vented filler plug/screw and drain used fluid into a sealable container. 2. Dispose of fluid in accordance with local regulations. 3. Fill with a good quality hydraulic oil as recommended above. Reinstall vented oil filler plug/screw. 1. Inspect hoses and connections daily. Replace damaged components immediately with BVA Hydraulics Replacement Parts only. 2. Tighten connections as needed.
LIMITED LIFETIME WARRANTY BVA Hydraulics®, represented in the United States by SFA Companies [“SFA”] warrants this product to be free from defects in material and workmanship for the life of the product as long as the original purchaser owns the product.
Hand Pump Service Parts MODEL: P1201S SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 * Fax: 816-891-6599 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Note: Not all components of the pump are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence.
Parts List (Model P1201S) Item Part Number Description Qty 1 677-5-0040-102 E-clip 2 2 H18-5-1318-104 Pin 1 3 H18-6-1318-100 Pin 1 4 H18-6-1317-108 Pin 1 5 667-5-0100-005 C-clip 1 6 667-5-0120-001 C-clip 1 7 H28-6-1814-100 Piston 1 8 H28-6-1815-203 Piston Seat 1 9 * Back-up Ring 1 10 * U-cup 1 11 * O-ring 1 12 H28-6-1813-209 Pump Cylinder 1 13 * Back-up Ring 1 14 * O-ring 1 15 H18-6-2114-200 Fixing Pillar 1 16 644-1-0060-071 Screw 1 17 D05
Hand Pump Service Parts MODEL: P1201 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 * Fax: 816-891-6599 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Note: Not all components of the pump are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence.
Parts List (Model P1201) Item Part Number Description Qty 1 H18-5-1317-108 Pin 1 2 H18-6-1318-100 Pin 1 3 677-5-0040-102 E-clip 2 4 H18-6-1318-104 Pin 1 5 667-5-0100-005 C-clip 1 6 667-5-0120-001 C-clip 1 7 H28-4-4406-108 8 * Piston Assy.
Hand Pumps Service Parts MODELS: P2301 & P4301 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 * Fax: 816-891-6599 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Note: Not all components of the pump are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence.
Parts List (Models P2301 & P4301) Item Part Number for Model: P2301 Description P4301 Qty 1 H18-6-1317-108 Pin 1 2 H18-6-1318-100 Pin 1 3 677-5-0040-102 E-clip 2 4 H18-6-1318-104 Pin 1 5 667-5-0100-005 C-clip 1 6 667-5-0120-001 C-clip 1 7 H28-4-4406-108 Piston Assy.
Hand Pump Service Parts MODEL: P2301M SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 * Fax: 816-891-6599 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Note: Not all components of the pump are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence.
Parts List (Model P2301M) Item Part Number Qty Item Part Number 1 E05-6-1008-109 Knob 1 33 * A67-6-1012-106 Handle Bar 1 34 1 35 2 3 Description A67-000001-1100 Label 4 649-1-0050-055 Screw 1 36 Description Qty Special Washer 2 414-6-1215-509 Oil Plug 2 512-2-0067-010 Compression Spring 1 H28-6-1617-108 Base 1 5 A67-6-1005-109 Control Valve Cover 1 37 * O-ring 1 6 644-1-0060-071 Screw 2 38 641-1-0098-103 Screw 1 7 601-7-0006-005 Steel Ball 2 39 651
SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 E-mail: sales@bvahydraulics.
