HF0503-M0 rev 12/07 Single Acting, Flat Body Cylinders Instruction Manual MODELS: HF0503, HF1005, HF2005, HF3005, HF5006, HF7506, HF10006 & HF15006 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 * Fax: 816-891-6599 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com ! This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
SAFETY and GENERAL INFORMATION animals, hazardous materials, mobile homes/dwellings in general, mirrors and/or plate glass, and/or to connect/secure hatches, components, etc. between bulkheads. The user ultimately must make the decision regarding suitability of the product for any given task and therefore accept responsibility for that decision. Immediately after lifting, loads must be supported by appropriate mechanical means. Save these instructions.
INSTALLATION Before operating the pump, tighten all hose connections with proper tools. Do not overtighten. Connections should only be tightened securely and leakfree. Overtightening can cause premature thread failure or high pressure fittings to burst. ! IMPORTANT! Use an approved, high-grade pipe sealant to seal all hydraulic connections. 1. Remove the dust cover and rubber plug from coupler. 2. Inspect all threads and fittings for signs of wear or damage, and replace as needed.
BEFORE USE Lubrication & Cleaning Keep cylinder clean at all times. 1. Any exposed threads (male or female) must be cleaned and lubricated regularly, and protected from damage. Lubricate with light machine oil. 2. If a cylinder or ram has been exposed to rain, snow, sand, airborne abrasive, or any corrosive environment, it must be cleaned, lubricated, and protected immediately after exposure. Daily clean exposed ram with clean cloth dampened with light machine oil.
TROUBLESHOOTING GUIDE The following information is intended as an aid in determining if problem exists. Cylinders should be repaired only by authorized BVA Service Center. For repair service, contact service center in your area. Symptom Possible Causes Corrective Action Erratic action • Air in system or pump cavitation. • External leakage in cylinder. • Cylinder sticking or binding. • Vent the system (refer to figure 2). • Contact service center. • Contact service center.
Single Acting, Flat Body Cylinder Service Parts MODEL: HF0503 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 * Fax: 816-891-6599 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Note: Not all components of the cylinder are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence.
Single Acting, Flat Body Cylinders Service Parts MODELS: HF1005, HF2005 & HF3005 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 * Fax: 816-891-6599 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Note: Not all components of the cylinder are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence.
Single Acting, Flat Body Cylinder Service Parts MODEL: HF5006 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 * Fax: 816-891-6599 Website: www.bvahydraulics.com E-mail: sales@bvahydraulics.com Note: Not all components of the cylinder are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence. Item Part Number Description 1 * 2 H24-5-1804-204 3 N/A 4 HF0503-M0 rev 12/07 Qty.
Single Acting, Flat Body Cylinders Service Parts MODELS: HF7506 & HF10006 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 * Fax: 816-891-6599 Website: www.bvahydraulics.com E-mail: sales@bvahydraulics.com Note: Not all components of the cylinder are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence.
Single Acting, Flat Body Cylinder Service Parts MODEL: HF15006 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 * Fax: 816-891-6599 Website: www.bvahydraulics.com E-mail: sales@bvahydraulics.com Note: Not all components of the cylinder are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence. Item Part Number 1 * 2 H24-5-1804-507 3 N/A Description HF0503-M0 rev 12/07 Qty.
LIMITED LIFETIME WARRANTY BVA Hydraulics®, represented in the United States by SFA Companies [“SFA”] warrants this product to be free from defects in material and workmanship for the life of the product as long as the original purchaser owns the product.
SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 E-mail: sales@bvahydraulics.
