User Manual
2
Model Capacity
(ton)
Stroke
(in)
Effective
Area
(in
2
)
Oil Capacity
(in
3
)
Collapsed
Height
(in)
Extended
Height
(in)
Cylinder
outside
Dia
.
(in)
Plunger
Dia.
(in)
Weight
(lb)
Push Pull Push Pull Push Pull
HD1010
10
3.8
10
2.23 0.74
22.4 7.5 16.14 26.18
2.87 1.37
26.7
HD1012
12
26.7 8.9 18.03 30.00 30.0
HD3008
30 16.2
8
6.49 3.19
52.9 26.0 15.31 23.46
3.98 2.13
43.0
HD3014 14 94.1 46.2 21.65 36.14 60.6
HD5506
55 16.2
6
10.99 3.19
67.9 19.7 13.03 19.21
5.00 3.13
70.5
HD5513 13 145 42.1 20.04 33.23 104.0
HD5520 20 221 64.2 28.86 48.98 146.2
HD7506
75 25.9
6
16.09 5.12
98.2 31.2 13.70 19.80
5.75 3.75
93.7
HD7513 13 211 67.0 20.71 33.82 136.8
HD10006
100 48.6
6
20.57 9.58
135 63.0 14.06 20.63
6.97 3.75
138.3
HD10013 13 270 125.6 20.63 33.74 193.6
HD10018 18 373 173.8 27.05 45.20 248.3
SPECIFICATIONS
SAFETY and GENERAL INFORMATION
Save these instructions. For your safety, read and
understand the information contained within. The owner and
operator shall have an understanding of this product and safe
operating procedures before attempting to use this product.
Instructions and safety information shall be conveyed in
the operator’s native language before use of this product
is authorized. Make certain that the operator thoroughly
understands the inherent dangers associated with the use
and misuse of the product. If any doubt exists as to the safe
and proper use of this product as outlined in this factory
authorized manual, remove from service immediately.
Inspect before each use. Do not use if leaking, broken,
bent, cracked or otherwise damaged parts are noted. If the
cylinder has been or suspected to have been subjected to
a shock load (a load dropped suddenly, unexpectedly upon
it), discontinue use until checked out by a BVA Hydraulics
authorized service center. Owners and operators of this
equipment shall be aware that the use and subsequent
repair of this equipment may require special training and
knowledge. It is recommended that an annual inspection
be done by qualified personnel and that any missing or
damaged parts, decals, warning/safety labels or signs be
replaced with BVA Hydraulics authorized replacement parts
only. Any cylinder that appears to be damaged in any way, is
worn or operates abnormally shall be removed from service
immediately until such time as repairs can be made.
!
!
PRODUCT DESCRIPTION
BVA Hydraulics Double Acting Cylinder is designed for rated
capacity pushing, spreading and pressing jobs. A wide variety
of applications exist for this category of product.
Each cylinder is equipped with a built-in safety relief valve in
the return circuit to prevent over-pressurizing. The valve is
preset to 10,000 psi; it will open as internal pressure exceeds
the preset pressure.
Special skill, knowledge and training may be required
for a specific task and the product may not be suitable
for all the jobs described above. Unsuitable applications
would include applications that call for a device to move,
level or support persons, animals, hazardous materials,
mobile homes/dwellings in general, mirrors and/or plate
glass, and/or to connect/secure hatches, components, etc.
between bulkheads. The user ultimately must make the
decision regarding suitability of the product for any given
task and therefore accept responsibility for that decision.
Immediately after lifting, loads must be supported by
appropriate mechanical means.
NEVER use hydraulic cylinder as a support device!
Always check connections before using. Alteration
of these products is strictly prohibited. Use only those
adapters and attachments provided and approved by the
manufacturer.
WARNING: To reduce the risk of personal injury and/or
property damage, ensure that the rated working pressure of
each pressurized attachment be equal to or greater than the
rated working pressure developed by the hydraulic pump.
!