H0500-M0_102012 Single Acting Cylinders Instruction Manual MODELS: H0500, H0501, H0503, H0505, H0507, H0509 H1001, H1002, H1004, H1006, H1008, H1010, H1012, H1014 H1501, H1502, H1504, H1506, H1508,H1510, H1512, H1514 H2501, H2502, H2504, H2506, H2508, H2510, H2512, H2514 H3008 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 * Fax: 816-891-6599 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.
SAFETY AND GENERAL INFORMATION ! Save these instructions. For your safety, read and understand the information contained within. The owner and operator shall have an understanding of this product and safe operating procedures before attempting to use this product. Instructions and safety information shall be conveyed in the operator’s native language before use of this product is authorized.
INSTALLATION NOTICE: Use an approved, high-grade pipe sealant to seal all hydraulic connections. 1. Remove the dust cover and rubber plug from coupler. 2. Inspect all threads and fittings for signs of wear or damage, and replace as needed. Clean all threads and fittings. 3. Connect hydraulic hose from hydraulic pump to the cylinder coupler. Ensure that there are no fluid leaks. 4. Install in-line pressure gauge. 5. Check for leaks in system and have repaired by qualified personnel.
SPECIFICATIONS Model Cylinder Effective Area (in²) Internal Pressure at Capacity (psi) Oil Capacity (in³) Weight (Lbs) Collapsed Height A (in) Extended Height B (in) Cylinder Bore C (in) Outside Diameter D (in) Plunger Diameter E (in) 3.07 H0203* 0.76 5,263 2.28 2 5.39 8.46 1 1.31 0.87 0.63 H0500** 1.1 9,091 0.69 1.85 1.63 2.26 1.18 L2.37xW1.59xH1.63 0.98 1 H0501 1 10,000 1 3.1 4.58 5.58 1.13 1.5 1 3.07 H0503 1 10,000 3.07 3.17 6.65 9.72 1.13 1.5 1 5.
SPECIFICATIONS Base Mounting Hole Model Plunger Diameter E (in) Saddle Diameter F (in) Base to Inlet Port G (in) Collar Thread H (in) Collar Thread Length L (in) 3.07 H0203* 0.87 1 0.46 1¼˝-16 0.54 - - 0.63 H0500** 0.98 - 0.75 - - - - 1.1 - - 1 H0501 1 0.98 0.79 1½˝-16 1.1 ¾˝-16UNF 0.63 1 ¼˝-20UNC 0.55 3.07 H0503 1 0.98 0.79 1½˝-16 1.1 ¾˝-16UNF 0.63 1 ¼˝-20UNC 0.55 5.08 H0505 1 0.98 0.79 1½˝-16 1.1 ¾˝-16UNF 0.63 1 ¼˝-20UNC 0.55 7.
OPERATION Lubrication & Cleaning Keep cylinder clean at all times. 1. Any exposed threads (male or female) must be cleaned and lubricated regularly, and protected from damage. Lubricate with light machine oil. 2. If a cylinder or ram has been exposed to rain, snow, sand, airborne abrasive, or any corrosive environment, it must be cleaned, lubricated, and protected immediately after exposure. Daily clean exposed ram with clean cloth dampened with light machine oil.
SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 E-mail: sales@bvahydraulics.
TROUBLESHOOTING GUIDE The following information is intended as an aid in determining if problem exists. Cylinders should be repaired only by authorized BVA Service Center. For repair service, contact service center in your area. Symptom Erratic action Cylinder will not extend, or respond to pressurized fluid Possible Causes Corrective Action • Air in system or pump cavitation. • External leakage in cylinder. • Cylinder sticking or binding. • Vent the system (refer to figure 2).
Single Acting Cylinder Service Parts MODEL: H0500 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 * Fax: 816-891-6599 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Not all components of the cylinder are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence. 3 2 5 Item Part Number 1 N/A Base Description Qty.
Single Acting Cylinders Service Parts MODELS: H0501, H0503, H0505, H0507, H0509 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 * Fax: 816-891-6599 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Not all components of the cylinder are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence.
Single Acting Cylinders Service Parts MODELS: H0501, H0503, H0505, H0507 & H0509 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 * Fax: 816-891-6599 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.
Single Acting Cylinder Service Parts MODEL: H1001 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 * Fax: 816-891-6599 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Not all components of the cylinder are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence. Item Part Number Description Qty.
Single Acting Cylinders Service Parts MODELS: H1002, H1501, H1502, H1504 & H1506 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 * Fax: 816-891-6599 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Not all components of the cylinder are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence.
Single Acting Cylinders Service Parts MODEL: H1004 & H1014 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 * Fax: 816-891-6599 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Not all components of the cylinder are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence. Item Part No.
Single Acting Cylinders Service Parts MODELS: H1006, H1008, H1010 & H1012 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 * Fax: 816-891-6599 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Not all components of the cylinder are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence.
Single Acting Cylinders Service Parts MODEL: H1508, H1510, H1512 & H1514 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 * Fax: 816-891-6599 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Not all components of the cylinder are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence.
Single Acting Cylinders Service Parts MODELS: H2501 & H2502 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 * Fax: 816-891-6599 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Not all components of the cylinder are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence.
Single Acting Cylinders Service Parts MODELS: H2504, H2506, H2508, H2510, H2512 & H2514 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 * Fax: 816-891-6599 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Not all components of the cylinder are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence.
Single Acting Cylinder Service Parts MODEL: H3008 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 * Fax: 816-891-6599 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Not all components of the cylinder are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence.
LIMITED LIFETIME WARRANTY BVA Hydraulics®, represented in the United States by SFA Companies [“SFA”] warrants this product to be free from defects in material and workmanship for the life of the product as long as the original purchaser owns the product.
