User Guide

30 BuzzSize Copyright © 2004 Buzz Tools, Inc.
•
•
•
•
•
•
Rotate
You can rotate your selection using the
Rotate tool located on the
Stitches-in-Space toolbar. BuzzSize
™
allows you to change the center of the rotation. By
default, you rotate your selection on its own
center. However, perhaps you want to rotate your
selection away from another object, or around the
center of the design. Move the center of rotation
by dragging the cross to the desired location
(Figure3-4). The numeric value of your custom
center is displayed on the status bar. The numeric
value of the custom center may be a negative number as this is an offset
from the center of the hoop.
You can toggle between a custom center and the center of the
selection by clicking on the Custom Center button located on the
main toolbar.
Rotate your selection by dragging the circular
boundary of your selection (Figure3-5). The
percentage rotation is displayed on the bottom
status bar.
You can also rotate your selection using specific
values for the degree rotation and the center of
rotation (choose BuzzTools > Rotate… ). For help
on this command, click on the Rotate Selection
dialogs Help button.
Figure 3-4 Drag the
cross to change the
center of rotation.
Figure 3-5 Rotate your
selection by dragging
the boundary.