User Guide

Copyright © 2004 Buzz Tools, Inc. BuzzSize
™
Basics 21
•
•
•
•
•
•
BuzzSize
™
selects the longest run of contiguous stitches within the
lassoed area, which often turns out to comprise just the element you want
to select (Figure2-8).
Figure 2-8 Drag around an area (left) to select the longest contiguous run
of stitches (right).
After you select some of the stitches in the design, the selected stitches
are shown in color, whereas the unselected stitches are shown in a faded
ghost color. A selection indicator is drawn around the entire selection and
it highlights the current selection in the Space window.
The first and last needle points of the selection are also marked. The first
selected needle point is marked with a small box. The last selected needle
point, the stitch cursor, is marked with a small triangle pointing in the
direction of the last stitch.
If the area selected is not what you need, you can use the Select Next
Lassoed button located on the main toolbar (or press Ctrl + L ) until
the run of desired stitches is selected (Figure2-9). This command is also
available from the Edit menu.
Figure 2-9 To select the next run of contiguous stitches, click the Select Next Lassoed
button or press Ctrl + L.