User Guide

20 BuzzSize Copyright © 2004 Buzz Tools, Inc.
•
•
•
•
•
•
Stitch Selection
BuzzSize
™
only allows you to modify complete color breaks or the entire
design. You can select individual runs of stitches but if you need to
modify them, you will need to purchase BuzzEdit
®
V2.
A selection always consists of one or more consecutive needle points and
stitches. Your selection can be anything from a single needle point (does
not include the associated stitch) to the entire design. The last needle
point of your selection is called the stitch cursor. The stitch cursor can be
found in both the Space and the Time windows. Any stitches created or
inserted into your design, will be inserted after the stitch cursor.
Using the Space Window to Select Stitches
When you first open a design in BuzzSize
™
, the Space window displays
your design in color and selects the first starting needle point only (note,
no stitch is selected, only a needle point).
Selecting Multiple Stitches. You select an area of a design in the Space
Work window with Lasso tool.
Click on the Lasso/Move tool button in the Space toolbar to activate
the lasso tool. Position your mouse in the Space window outside of
any previous selections and then draw a lasso around the area of interest.
NOTE The BuzzSize
™
workspace contains only one selection at a time, regardless
of whether you use the Work window or the Time window to make your selection.
Once made, the selection is highlighted in the both windows.