User Guide

86 – BuzzEdit

™

, Inc.

Multiple-Hoop Printouts

The template is printed in

actual size and may need

to be taped together.

From BuzzEdit

™

you can print a

template of your design using the

File > Print Template command. The

template is printed in actual size. It may

span several pages in which case you

will need to tape the pages together.

The template is used for positioning the

complete design on your fabric and for

marking the center needle point of each

design section. This center needle point

is used for any final positioning that may

be required at the sewing machine.

In addition, you can print a work list

for the full design using the

File > Print Summary command.

This printout lists the order in which

your design must be sewn and the

position of the hoop for each

section.

The summary printout lists

the design order and the

hoop position for each section.

Note: Normally, BuzzEdit

™

will only print hoop sections

that contain stitches. To print an empty template that shows all

available hoop sections, create an empty design for the

multiple-position hoop of your choice. Then choose File >

Print Template.