User Guide

, Inc. 4 | Multiple-Hoop Designs - 77

Paste a Design Element

Use the Open > New Workspace command to open additional

BuzzEdit

™

workspaces in order to copy and paste selections from

one design to another. You can then build the multiple-hoop design

by copying runs of stitches from designs in other BuzzEdit

™

workspaces. With the stitch cursor correctly positioned in the hoop

section of your choice, choose Edit > Paste. This will paste the

contents of the BuzzEdit

™

clipboard into the active design.

Pasted stitches are always inserted following the stitch cursor and

they are also always pasted to the same spatial location from which

they were cut or copied from. If you want to move them from this

position, select the Lasso/Move tool if it is not already active and

drag the selected stitches within the Space window until they are in

the desired location. Or you can center the stitches in the current

hoop by choosing Tools > Center Both.

The pasted stitches are being dragged in space

to the desired location in the correct hoop section.

Create a Multiple-Hoop Design by

Subdividing an Oversized Design into Hoop Sections

Let's say you have an oversized design that was created for a

different embroidery machine whose embroidery field is larger than