User Guide

60 – BuzzEdit
™
| Copyright © 2000 Buzz Tools
®
, Inc.
Sew each design file in sequence onto the same
piece of fabric in order to create the full design.
When BuzzEdit
™
saves a series of files, it also saves a manager file,
so that you can read back in the whole series of files at a later time
in order to edit or view the overall design. When you are ready to
sew the design, you sew each of the design files in sequence onto
the same piece of fabric in order to create the full design.
" Note: The PES (version 2.5 or greater) format supports
their three-position multi-hoops. When you edit and save one
of these files, BuzzEdit
™
will not save a manager file unless it
needs to do so for some other reason. However, because your
design is still separated into separate design sections, your
BuzzEdit
™
Stitches-in-Time
™
window will still display the
section breaks.
BuzzEdit
™
Manager File
Most multiple-file and multiple-hoop designs created in BuzzEdit
™
take advantage of a BuzzEdit
™
manager file. This manager file
contains important information including the name of the design files
used in your complete design, the hoop you are using and the hoop
positions of the design sections. In addition, BuzzEdit
™
saves your
stitch information if you need to stop editing your design before all of
the design sections are placed correctly in a hoop.
The manager file's name is always the name of the original file or
the name you selected when you saved your design. Each design
file used for sewing your full design is assigned a new name. The
new files are named the same as the manager file with a letter
appended to the end. The first file sewn is appended with the letter
A; the second file sewn is appended with the letter B and so on.
" Note: The manager file is used by BuzzEdit
™
to allow you
to read the multiple-file design back into BuzzEdit
™
and is not
sewn. The letter appended to the end of the file name
corresponds to the order in which it is sewn and is NOT the
hoop position.