User Guide

Copyright © 2000 Buzz Tools
®
, Inc. 2 | Manipulating Stitches - 45
Space Tools
Once you have made your stitch selection, you can use the
Stitches-in-Space tools to move, rotate, flip, resize or
stretch the selected stitches. There are also similar tools,
accessed from the Tools menu that provide dialog-based
versions of these commands.
Move
You can move your selection using the Lasso/Move tool
located on the Stitches-in-Space toolbar. Your selection can
be as small as a single needle point or as large as the entire
design.
Click on the Lasso tool; then move your
cursor into the center of your selection. Drag
your selection to the desired location. If your
selection is a single needle point, drag the
Space stitch cursor to the desired location.
Dragging a Selection
You can also move your selection using the Tools > Move…
command. This procedure is described in the BuzzEdit
™
Command
Reference on page 148.
Rotate
You can rotate your selection using the Rotate tool located
on the Stitches-in-Space toolbar.
BuzzEdit
™
allows you to change the center of
the rotation. By default, you rotate your
selection on its own center. However,
perhaps you want to rotate your selection
away from another object, or around the
center of the design. Move the center of
rotation by dragging the cross to the desired
location. The numeric value of your custom
center is displayed on the status bar.
Drag the cross to change
the center of rotation.