User Guide

168 – BuzzEdit
™
| Copyright © 2000 Buzz Tools
®
, Inc.
order that the hoop positions are sewn in may vary. For example,
the middle hoop position may be stitched before either the bottom or
top hoop positions.
" Note: The PES (version 2.5 or greater) file format supports
the three-position multiple hoops. This new PES version can
save all of the design sections in one file for use with one of
the standard three-position multiple hoops. If you are creating
a Giant design out of PES files, BuzzEdit
™
will save a
manager file to keep track of information required for these
hoops.
Giant Multiple-Position Hoops
Giant Hoop-it-All
™
and Giant-L Hoop-it-All
™
Hoop-it-All™, Inc. manufactures a unique type of multiple-position
hoop frame called the Giant Hoop-it-All™. Each different machine
type needs its own type of Giant Hoop-it-All™ frame. Giant
Hoop-it-All™ frames are currently available for several home
embroidery machines, and Hoop-it-All™, Inc. plans to support
additional machines in the near future.
Hoop-it-All™ embroidery frames hold the fabric in place by using an
adhesive stabilizer that is first applied to the hoop. The Giant
Hoop-it-All™ differs from the other multi-hoops in that the hoop
frame may be rotated and mounted onto the embroidery machine on
more than one side.
Hoop-it-All™, Inc. has created two varieties of the Giant
Hoop-it-All™. The standard Giant Hoop-it-All™ frame can be rotated
for mounting on all four sides, creating a very large embroidery area
that is created by sewing out multiple design files.