User Guide

156 – BuzzEdit

™

, Inc.

fill. To eliminate this problem, reverse the sewing order of the

understitching separately from the design fill area.

Tools > Insert Section Break…

The Insert Section Break command brings up the Insert Section

Break dialog box.

Use to insert a section break into your design.

Use to insert a section break at the stitch cursor. All designs can

insert new file section breaks. Multiple-Hoop designs can also insert

new hoop flags, the names of which will vary depending on the

multiple-hoop that is currently in use.

Normally section breaks are added automatically so you do not

usually need to use this command. For example, when you choose

a multiple-position hoop type, section breaks for each hoop position

are automatically appended to your design.

Section breaks are also added automatically when needed to keep

your design files within the limits imposed by the multiple-file

settings. These limits may include restrictions on the number of

colors and/or the number of stitches. These settings may be

modified by choosing View > Multiple-File Settings. See page144

for more information on Multiple-File Settings.

When would you use this command?

You might want to add a second section of a particular hoop

position. Use this command to insert the additional hoop section.

You might want to adjust the position of an automatic section break;

for example, to pull one color into one section or another. You might