User Guide

152 – BuzzEdit

™

, Inc.

Stitches-in-Space window. However, your design is not actually

changed until you click OK .

Center of stretch is set to the

tip of the bird's beak.

You can also change the center of your

stretch. The center during stretching is

the area of the design that does not

move. You may find this useful if you are

stretching a selection to fill a gap in your

design.

In this example, the center of the stretch

has been set to the tip of the beak.

In addition, you can change the angle of the

stretch. This changes the direction in which

your selection is stretched. The angle of the

stretch is shown by the line dividing the

selection boundary. In this example, the

angle of stretch is set to 45 degrees

clockwise and the Stretch tool is using a

custom center.

The bird is stretched using

a custom center,and the

mirror is set to45 degrees.

Tools > Flip

HORIZONTAL

Horizontally flips your selection.

VERTICAL

Vertically flips your selection.

BOTH

Flips your selection both vertically and horizontally.