User Guide

108 – BuzzEdit

™

, Inc.

2 Select the Stitch

Hold down the shift key and press the

left arrow once to select one stitch. If

you select too many stitches, you can

adjust the selection by holding down the

shift key and pressing the left and right

arrows.

If you have selected the stitch correctly,

the design displayed in the Space

window will fade to the ghost color and

only one stitch will be displayed in color.

Because only one needle point is

included in the selection, the box

indicating the first needle point is not

displayed.

A single stitch

is selected.

Change Stitch Types

Most commonly, you will use this command to change a single, long

jump stitches to the matching stitch type Jump.

1 Select a single stitch using one of the methods described in the

previous example.

2 Change Stitch Type

On the main toolbar is a drop down combo box

that displays the current stitch type. If this combo box is blank, it

means the selection contains multiple stitch types. To change the

stitch type of the current selection, use the drop down combo box

to choose a new stitch type.