Manual

6
5
55
5]
] ]
] Controls
ControlsControls
Controls
EQ Band Controls
EQ Band ControlsEQ Band Controls
EQ Band Controls
FREQUENCY
FREQUENCYFREQUENCY
FREQUENCY – each band has a 12 position frequency control which sets
the centre frequency of the filter. The two mid bands have two ranges of
frequency, and the blue lettering applies when the FREQ x2.5
FREQ x2.5FREQ x2.5
FREQ x2.5 switch is
illuminated.
BANDWIDTH
BANDWIDTHBANDWIDTH
BANDWIDTH (low mid and high mid) – a 12 position switch to set the width of
the bell filters ranging from 2 octaves to 0.25 octaves wide. See the graphs
at the end of this manual for more detail.
BANDWIDTH/
BANDWIDTH/BANDWIDTH/
BANDWIDTH/SLOPE
SLOPESLOPE
SLOPE (low and high bands) – the low and high bands can be
switched into shelf mode (BELL/SHELF
BELL/SHELFBELL/SHELF
BELL/SHELF switch illuminated), and the bandwidth
control reverts to a shelf slope control in this mode. Position 2 is a steep
slope whilst position 13 is a more gentle curve. See the graphs at the end
of this manual for more detail.