User's Guide

2. Turn off the Bluetooth on device 1, and turn on Bluetooth on phone 2
3. Search and pair the headset to device 2
4. Turn on Bluetooth on device 1 and connect to earphones
Charging
Open USB door on controller and connect micro USB cable
Using voice
command
Hold volume down for 3 seconds to activate.
LED
Indication
 LED turned off when headset powered off or not charging
 Power on: white LED on 1s
 Power off: red LED on 1s
 Pairing: LED alternates flashing Red and White
 Connected: white LED 0.1s on/4s off
 Disconnected: white LED 0.1s on 2 times/2s off
 Incoming call: white LED 0.5s on /0.5s off
 Outgoing call: white LED 0.5s on /0.5s off
 Active call: white LED 1s on /1s off
 Music play: white LED 1s on /4s off
 LED is changed from white blinking to Red blinking when battery low
 Charging：The headset will power off and enter charging mode - LED signal red
while charging, Solid white when full charge is reached.
Music Mode Functio
n
Status Sound
indication
Operation
Volume up Music or phone
call mode
No Press volume +
Volume
down
Music or phone
call mode
No Press volume -
Play/Pause Music mode No
Short press multifunction
button
Next song Music mode No Double p
ress multifunction
button
Previous
song
Music mode No Triple p
ress multifunction
button
Phone call
Answer call
Incoming call
‘Beep’ sound
Press multifunction button 1