IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT 1. Read these instructions and keep them for future reference. 2. Carefully follow instructions and take heed to all warnings. 3. Do not use this apparatus near water. 4. Clean amplifier housing only with a slightly damp cloth. 5. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. 6.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage " within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Contents......................................................Page Number Important Safety Instructions.............................................02 Amplifier Warnings / Cautions..............................................03 Amplifier Usage Guidelines..........................................05 Amplifier Specifications......................................................05 Included Accessories............................................................05 Amplifier Operation - Front Panel..............
Amplifier Usage Guidelines This amplifier is designed for use with the following ButtKicker® transducer models only: BK-GR...................(quantity 1 max) BK-mini-LFE............(quantity 2 max) BK-mini-CT..............(quantity 1 max) BK4-4....................(quantity 2 max) BK4-2...................(quantity 1 max) Amplifier Specifications Dimensions: 9.5 L x 7.5 W x 2.76 H Weight: 5.6 lbs./2.5 kgs.
Front Panel
Amplifier Operation - Front Panel (From Left to Right) POWER BUTTON The Power Button engages and disengages amplifier circuits. Check all amplifier connections and verify the AC line power source before engaging the Power Button. If in Standby mode, the amplifier will be brought into full On mode automatically when an input signal is reapplied, or manually by pressing the Power Button twice to turn the amplifier off, and then back on.
Rear Panel
Amplifier Operation - Rear Panel (From Left to Right) IEC TYPE POWER CORD RECEPTICAL Attach one end of power cord here for operation. FUSE HOLDER (INTEGRATED INTO THE POWER RECEPTICAL) Fuse for 120v operation:T4AL 250VAC. A spare fuse is also contained in the fuse holder for your convenience. Pull straight out after removing power cord. Both the active fuse and the spare fuse are removed. HARD POWER SWITCH Removes all AC power from all internal circuits of the amplifier.
Remote Control Connection Plug the Remote Control into the front of the BKA-130-C Power Amplifier where it says Remote. Please note the correct side up on the connector. Operation POWER BUTTON The Power Button duplicates the Power Button on the front panel of the amplifier.
Optional Base Stand The BKA-130-C can also be set in an upright, vertical position by placing it in the optional Base Stand (included).
