Quick Start Guide

CONSOLE SYSTEM ADJUSTMENT

PLEASE NOTE:

TURN OFF THE AMPLIFIER WHEN NOT IN USE.

1. Turn on the ButtKicker Power Ampliﬁer.

2. Turn on your gaming console and play your favorite game

or movie.

3. Adjust the ButtKicker Power Ampliﬁer. See the FAQ section

on the back page for detailed information on common knob

and switch settings.

4. If you are using your gaming console through a surround

sound receiver, you may need to adjust the level of the

subwoofer output to give more or less input signal to the

ButtKicker Power Ampliﬁer.

5. If you ﬁnd that your chair makes an unwanted rattling noise,

try immobilizing the height adjustment lever with foam, or by

attaching a weight to the end of the lever.

6. Enjoy!

BUTTKICKER GAMER

CONSOLE GAMING INSTALLATION

Output From Optical (TOSLINK)

On PS4/ XBOX ONE / Headphone Base Station

Connecting to Consoles

If you use a sound system with your console you can easily connect to the RCA subwoofer output of

your sound system following the instructions for Connecting to a Sound System. If you use only TV

speakers with your console you can connect to the Optical Output (TOSLINK) of your console using an

Optical to Analog RCA Converter. These instructions are also applicable if you use headphones that

include a base station with an Optical Audio (TOSLINK) Output.

Please note that an HDMI extractor should not be used to connect.

Connect to Optical Input

On Optical to Analog RCA Converter

Connect From Red or White Output on Converter

to INPUT on ButtKicker Power Amplifier

Do not use both Red AND White Outputs