Installation & Assembly

Read all instructions before starting assembly.

Step#1 Remove all the contents from the package checking that all of the components listed in

"packaged" are included. Prepare a flat protected work surface where the products can be

assembled.

Step#2 Align Left Side Frame (E) and match it up to the corresponding left edge of Seat Cushion (H)

so that the holes in the Seat Cushion match up with the threaded inserts

of the Left Side Frame (E). Attach Lock Washer (B) and Flat Washer (C) onto Bolt (A). Insert Bolt (A)

with attached washers through inside hole of Seat Cushion (H) bottom and engaged it into the

threaded insert in Left Side Frame (E) and loosely tighten. Repeat procedure for second Bolt (A) with

washers for attaching Left Side Frame (E).

Step#3 Attach Back Panel (G) with two Bolts (A),Lock Washer (B) and Flat Washer (C), loosely

tighten.

Step#4 Attach Front Rail (I) to front middle block of Left Side Frame (E) by using Bolt (A) Lock

Washer (B) and Flat Washer (C) and engaged from outside of Left Side Frame (E) into the threaded

insert in middle block, loosely tighten.

Step#5 Repeat the same procedure

as described in step#2.3.4 for

assembling Right Side Frame (F)

to the Seat Cushion (H), Front

Rail (I) and Back Panel (G), loosely

tighten.

Step#6 Securely tighten all bolts and

attach Wood Buttons (D) to the 6

Bolts (A) used to assemble left and

right side frames.

PAGE 1
Read all instructions before starting assembly. Step#1 Remove all the contents from the package checking that all of the components listed in "packaged" are included. Prepare a flat protected work surface where the products can be assembled. Step#2 Align Left Side Frame (E) and match it up to the corresponding left edge of Seat Cushion (H) so that the holes in the Seat Cushion match up with the threaded inserts of the Left Side Frame (E). Attach Lock Washer (B) and Flat Washer (C) onto Bolt (A).