Specifications

will illuminate (Figs 4). When the green lamp does not illuminate, replace the batteries.

LOADING THE CAMERA:

Use 20 or 36 exposure 35mm film

1. Pull out the film rewind knob until the camera back is released (Fig. 5). Then pull the camera back

fully open.

2. Keep the film rewind knob pulled all the way out, insert the film cartridge into the film chamber with

the protruding end into the chamber at the bottom of the camera (Fig. 6). Push in the film retinal knob.

It may be found necessary to turn the knob slightly so that the rewind catch engages the film cartridge

spool. Insert the trimmed end of the film into the slot of the take-up spool. Holding the film lightly

down on the film sprocket, operate the film advance lever. Having checked that the upper and lower

film perforations have engaged the transport sprockets, close the camera back firmly until a click.

4www.butkus.org

NOTE: DO NOT LOAD OR UNLOAD THE CAMERA IN BRIGHT SUNLIGHT.

MEMO HOLDER/ADVANCING THE FILM: