Specifications

Installing the Batteries
1. Using a coin, unlock the battery chamber cover by turning it counterclockwise.
2. Place the two 1.5V silver oxide G- l 3 type batteries (Eveready S -76 or equivalent) with the minus( - )
side facing upwards
(Fig. l ).
3. Replace the battery chamber clever by turning fully clockwise
(Fig. 2).
NOTE: CLEAN THE BATTERIES WITH A DRY CLOTH OR PAPER BEFORE INSERTING
AND THEREAFTER AT REGULAR INTERVALS. MAKE SURE THAT THE BATTERIES ARE
INSERTED CORRECTLY, i.e. CHECK POLARITY. THE SHUTTER WILL OPERATE ONLY
WHEN BATTERIES ARE INSTALLED, EXCEPT FOR THE "X" (1/ 100 sec.) AND "B',
POSITION.
Testing the Batteries
Test the batteries when:
New batteries are installed.
The camera has not been used for a long period of time.
The camera is being used continuously for many hours.
To test the batteries, set the shutter speed dial to the "Auto" position
(Fig. 3), and press the shutter release
button half way. If the batteries are in good condition, the green lamp in the viewfinder frame will go on.
When the green lamp does not go on, replace the batteries
(Fig. 4).
NOTE: EVERY TIME A PHOTOGRAPH IS TAKEN IN THE AUTO MODE, THE GREEN LAMP
SHOULD GO ON, INDICATING THAT THE BATTERIES ARE STILL IN GOOD CONDITION.
WHEN THE INDICATOR LAMP FAILS TO GO ON, REPLACE THE BATTERIES AT ONCE.