Specifications

film. Couple the fantastic features of the new CM-3 and C~3 with the Chinon Power Winder and the
50mm f/1.7 Chinon macro lens and creative capabilities are virtually endless. In addition to the 50mm f/1.7
macro lens your new CE-3 and CM-3 accepts an entire "system" of top quality lenses:www.4.butkus.org
MACRO LENSES:
50mm f/1.7MC Macro
55mm f/ 1.7 Macro
40 ~ l 05mm f/3.5 MC Macro
85 ~ 2 l0mm f/4.5 MC Macro
* Panatomic X, Kodachrome 25, and Kodacolor ll and Tri-X and Kodacolor 400 are registered trademarks
of Eastman-Kodak.
CHINON POWER WINDER:
Your Chinon C~3 Memotron Compact single lens reflex camera can also be used with the new Chinon
Power Winder when motorized photography is desired. This sophisticated accessory enhances the
versatility of your new camera and opens up new horizons for creative photography
(Fig. 52).
The Power Winder, designed with the latest electronic technology, employs a special computer "memory"
chip which monitors key functions essential to motorized photography
(Fig. 53).
Single Frame Mode:
As in normal photography however the Power Winder can be coupled with an accessory remote control
device (Fig. 54).
Continuous Mode:
Outstanding "hi-speed" effects such as subjects moving or changing expressions can be caught on film.
Couple this feature with the unique pre-set counter and electronic interval timer features and you can do
almost anything photographically with your new Chinon camera
(Fig. 55).
Pre-Set Counter:
The special "memory" chip monitors a preselected amount of exposures up to 24 frames - at a set of a dial
(Fig. 56).
Interval Timer:
Time lapse photography at your fingertips. By means of the "unique" memory chip it is now possible to
make exposures up to 30 seconds apart (Fig. 57).
It is possible to photograph just the same as in normal photography even when your Power Winder is
attached to your new Chinon camera.www.4.butkus.org
1. Remove the film winder coupler cover located on the bottom of your Chinon CE-3 Memotron by turning
it counterclockwise and it should be stored in the storage socket of the Power Winder (Fig. 58).
2.The C / S dial of the Power Winder should be turned to the off position so that frames are not
accidentally exposed when the winder is installed to the camera body.