Getting Started Guide

!
1. Press and hold the power button for 4 seconds. The Proxy’s
Red and Blue LEDs will blink rapidly. !
2. Navigate to your Bluetooth device’s setup screen, find!
“The Proxy” and connect.!
3. If your device asks for a password or pin, skip or cancel!
the password or pin input screen.!
Note: The next time you approach The Proxy with your
dddBluetooth device, it will automatically re-pair.!
4. To pair a new device, press and hold the phone button for 3
dddseconds to break the current connection. The red and blue
dddLEDs will flash repeatedly. Repeat Step 2.!
5. If your Bluetooth device is not able to pair to The Proxy, hold !
phone button for 3 seconds to break previous Bluetooth c
dddconnections and power the Proxy off, then back !
aaaNote: If you experience trouble pairing or playing music!
sssupdate your devices’s OS.!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
2
! PAIRING A BLUETOOTH DEVICE
PROXY LED ACTIVITY!
!
•
Blinking Red and Blue LEDs
Not Paired/No Connection!
•
Blinking Blue LED!
Paired and Connected!
•
Solid Red LED!
Charging!
•
Blinking Red and Blue LEDs!
In Broadcast Pairing Mode!
•
No LED activity !
No Powered on/Sleep Mode!