System information

84 LINGO TECHNICIAN’S GUIDE
Installing the Remote Maintenance software on
the support computer
Before installing the Remote Maintenance
software, make sure the support computer
meets the requirements described in the
preceding topic.
Note Lingo uses version 6.1j of Remote
Maintenance. The support computer can
use version 6.1j or higher.
To install the Remote Maintenance software on
the support computer
1
Determine which COM port the modem
uses. You supply this information during
the installation.
2
At the command prompt, go to the drive
where you want to install the Remote
Maintenance software (for example,
C:\).
3
Insert the Remote/Dealer Disk in drive A
and type A:INSTALL. Press ENTER.
4
Follow the on-screen prompts.
The installation process creates a REMOTE
directory (for example, C:\REMOTE).
Remote Maintenance is installed in this
directory.
See also
Connecting to Lingo by using Direct
Connect .................................................. 81
Connecting to Lingo with a modem ......... 82