System information

144 LINGO TECHNICIAN’S GUIDE
Option name Description
Dial-out pause—
comma
Length of a pause—represented by a comma (,)—in a dialing
sequence.
Dial-out pause—
semicolon
Alternate length of a pause—represented by a semicolon (;)—
in a dialing sequence.
Dial-tone check
at dial-out
Dial tone check before dialing out to deliver messages or light
lamps. When this option is turned on, Lingo does not attempt
dial out unless it hears dial tone; if it doesn’t hear dial tone, it
assumes there is an incoming call and will play the opening
greeting.
DTMF Call Progress
(on/off) - DTMFCP
DTMF call progress detection. When this option is turned on,
Lingo recognizes tones on telephone systems that provide
DTMFCP.
SYSTEM OPTIONS WORKSHEET
Disconnect detection Hang-up detection. When this option is turned on, Lingo
assumes a caller has hung up if it detects telephone system
disconnect tone, telephone system dial tone, public network
disconnect tone, or public network dial tone.
Delete messages If enabled, offers subscriber the option to delete messages
after they have been heard.
Dial-out DTMF
duration
Length of time Lingo plays a touchtone in a dialing sequence.
DTMF low tone power Loudness of the low tone of the DTMF that Lingo generates.
Executive trace Do not turn on this option unless asked to do so by Technical
Support.
Extra wait time for dial
tone check
The amount of additional time Lingo uses to check for dial
tone when dialing out.
DTMF high tone
power
Loudness of the high tone of the DTMF that Lingo generates.
DTMF inter-digit
delay
Length of time between each touchtone Lingo plays in a
dialing sequence.