Installation Manual

6710 N CATLIN AVE. • PORTLAND, OR 97203 • 503-283-4335 • 1-800-234-8920 (USA AND CANADA) • FAX [phone]
Pull tape liner 11 to the right toward the passenger
side of the vehicle. NOTE: Refer to step 24 for tape
liner tab numbering.
Using a #2 Phillips screwdriver, reinstall tail light.
Reconnect light connector of tail light.
Pull tape liner 9 for the 1/4” tape to the left toward
the driver side of the vehicle. NOTE: Refer to step
24 for tape liner tab numbering.
Pull tape liner 10 downward. NOTE: Refer to step 24
for tape liner tab numbering.
38
40
39
36 37
Once all tape liners are peeled, press down on
entire again applying 30 PSI to the taped areas.
Take special care in pressing down around the tail
light. NOTE: The tape reaches maximum adhesive
bond after 24 hours of contact. Do not wash vehicle
for 24 hours.
41