Installation Manual

6710 N CATLIN AVE. • PORTLAND, OR 97203 • 503-283-4335 • 1-800-234-8920 (USA AND CANADA) • FAX [phone]
Pull tape liner 7 downward. NOTE: Refer to step 24
for tape liner tab numbering.
Using a #2 Phillips screwdriver, remove the tail
light.
Press fi rmly on side of part where the two previous
tape liners were removed.
Pull tape liner 5 left toward the front of the
vehicle. Press side of part fi rmly for proper tape
adhesion. NOTE: Refer to step 24 for tape liner tab
numbering.
Pull tape liner 6 to the right toward the passenger
side of the vehicle. NOTE: Refer to step 24 for tape
liner tab numbering.
32
34
33
30 31
Pull tape liner 8 downward. NOTE: Refer to step 24
for tape liner tab numbering.
35