Installation Manual
6710 N CATLIN AVE. • PORTLAND, OR 97203 • 503-283-4335 • 1-800-234-8920 (USA AND CANADA) • FAX 503-283-3007
Pull tape liner 1 to the left toward the driver side of
the vehicle. NOTE: Refer to step 24 for tape liner tab
numbering.
Pull tape liner 3 downward on a slight diagonal
matching the curvature of the part. NOTE: Refer to
step 24 for tape liner tab numbering.
Pull tape liner 2 downward on a slight diagonal
matching the curvature of the part. NOTE: Refer to
step 24 for tape liner tab numbering.
Position the part on the vehicle so it fi ts around the
gas door. Then, using a #2 Phillips screw driver,
reattach the tail light.
26
28
27
25
Using a marker, label the tape tabs with the numbers
1-11 as shown. Using masking tape, tape each tab
on the outside of the part.
24
Rear Corners Installation Procedures (Driver Side)
Pull tape liner 4 downward. NOTE: Refer to step 24
for tape liner tab numbering.
29
1
2
3
7
4
6
8
9
10
11
5