Installation Manual

6710 N CATLIN AVE. • PORTLAND, OR 97203 • 503-283-4335 • 1-800-234-8920 (USA AND CANADA) • FAX [phone]
Tape liners 4, 5, & 6 may be removed in any order.
Pull tape liner 4 downward. Pull tape liner 5 to the
right. Pull tape liner 6 upward. NOTE: Refer to steps
8 & 9 for tape liner tab numbering.
Pull tape liner 3 to the right toward the passenger
side of the vehicle. NOTE: Refer to steps 8 & 9 for
tape liner tab numbering.
1716
Pull tape liner 2 downward. NOTE: Refer to steps 8
& 9 for tape liner tab numbering. Using a #2 Phillips
screwdriver, remove the light again.
15
Press down fi rmly around the entire lower line of the
part where the tape was removed.
Pull tape liner 1 to the right toward the passenger
side of the vehicle. NOTE: Refer to steps 8 & 9 for
tape liner tab numbering.
14
13
Make any necessary adjustments to the part to
ensure it aligns properly around the tail light.
12