TRAIL CAMERA VIEWER/COPIER Instruction Manual Model #: 11-9501 LIT #: 98-1006/07-07
The Bushnell® Trail Scout Viewer/Copier is a convenient, portable device that is the perfect companion for any model of Bushnell Trail Scout™ or Sentry™, as well as most other trail camera brands*. Simply remove the SD or CF card from your trail cam and place it into the slot for that type of card.
The Trail Scout Viewer/Copier Is Compatible With All Current & Future Models of Bushnell Trail Scout and Trail Sentry Cameras, Including These: 119833—Digital Trail Scout 3.0MP Great images and scouting technology at a great value. This camera will sense deer and other game as far out as 45 feet with its passive infrared sensor. Low-battery indicator lights when battery life drops below 25%. Motion LED lights when activity is detected by the sensor in regular imaging mode and during setup mode for aiming.
Item Parts Guide Function A B C D Camera Card Slots ( Only Reads files) Storage Card Slot (Read or Write files) USB Port Power Switch A C B 1 2 3 A With the slots oriented as shown (lettering upright, USB on right), SD cards should be inserted “face down” (metal contacts on card facing up, notched corner on rear left). To insert, push it clicks. To remove SD cards, push in again, then pull out. CF cards (face up) simply push in/pull out.
Display Icons File Locked (also a still photo option) Curent file # / Total files on card Resolution (in pixels) of the Photo Battery Indicator DISPLAY ICONS-STILL PHOTOS Indicates Video File Type DISPLAY ICONS-VIDEO CLIPS
Setup 1. Open the battery cover located on the bottom of the Viewer by sliding it the direction of the arrow on the cover, and insert two AA size batteries (alkaline, lithium or NiMh) with the flat end (negative, or “-” terminal) of each battery in contact with the springs. Slide the cover back to the closed position. The small holes on the back of the Viewer, just below the battery cover, allow sound from the speaker to be heard during playback of video clips that may also contain audio. 2.
Viewing Photos and Videos If only one card is inserted into any of the Viewer’s card slots (only CF cards can be used in the CF slot), the Viewer will automatically display the files stored on that card. If cards are inserted into both the SD “Storage” card slot (B) and either of the “Camera” slots (A), only the files stored on the card in the “Camera” slot will be displayed.
Deleting Photos/Videos To delete the one or more photo or video files from the card, briefly press the Delete button. You will see this list of options (the Delete Menu): DELETE ONE DELETE ALL LOCK UNLOCK EXIT To delete the currently displayed photo from its card, leave “DELETE ONE” highlighted (or press the Delete or Copy buttons to select it if necessary). Press the Left button-you will see “DELETE ONE “ with a choice of “YES” or “NO” (“NO” is the highlighted default, to prevent accidental erasure).
Lock/Unlock Feature (Protecting Files) To protect the currently displayed photo/video from being accidentally deleted or erased, briefly press the Delete button to view the Delete Menu. Press the Delete button to move down the list until “LOCK” is highlighted, then press the Left button to confirm. The display will indicate “LOCKED” then return to the normal view. A padlock icon will now be visible in the top right corner whenever this photo or video file is displayed on the Viewer.
Copying Photos To A Second Card-cont. To perform the copy process, a blank SD card (or one previously used to copy files with the Viewer) should be inserted in the “Storage” slot located below the CF card slot. You may use standard or high speed SD cards, with any capacity up to a maximum of 1GB.
Setup Options Hold down the Left button for a few seconds to view the Setup Menu. Just as in the other menus, use the Delete and Copy buttons to select (highlight) “LANGUAGE” or “AUTO OFF” from the Setup Menu, then press the Left button briefly (don’t hold it down) to see the available settings for that option. Press Delete or Copy again to select your preferred setting, then press the Left button to confirm the setting and return to the Setup options.
Using the Viewer With A Computer (Card Reader Function) The USB port next to the card slots on the left side of the Viewer allows it to function as an SD “card reader” when connected with the included USB cable to any computer (Windows 2000, ME, XP or Vista (Windows 98/98SE Is not supported); Mac OS 9 or OS X). The connected Viewer will operate just like an external hard drive, from which your photos may be accessed for viewing, editing and/or storing on your computer.
Transferring Photos to Your PC-cont. 3. (This step is not required with Windows XP or Vista-you may simply use the options that will appear on your PC after the Viewer is connected to view, copy, edit, email, etc. your photos). Open “My Computer” or Windows Explorer. The Viewer will be shown as a new “Removable Disk” with an unused drive letter assigned to it. Double click this new “Disk” icon, then open any folder or folders found inside to get to your photo files.
Transferring Photos to Your PC-cont. 7. If you are using photo editing software on your computer, refer to the manufacturer’s manual or Help menu for details on using its features. Along with adjusting the brightness, contrast, sharpness and color of your photos, you can resize the photo to fit the paper if you are printing, or save a smaller, low or medium resolution version for email or inserting into documents. When you are ready to save your edited .
TWO-Year LIMITED WARRANTY Your Bushnell® product is warranted to be free of defects in materials and workmanship for two years after the date of purchase. In the event of a defect under this warranty, we will, at our option, repair or replace the product, provided that you return the product postage prepaid. This warranty does not cover damages caused by misuse, improper handling, installation, or maintenance provided by someone other than a Bushnell Authorized Service Department.
For further questions or additional information please contact: Bushnell Outdoor Products 9200 Cody, Overland Park, Kansas 66214 Customer Service (800) 423-3537 • www.bushnell.
