Operation Manual

FOCUSING
1. Adjust interpupillary distance. (Figure 1)
2. Set the “diopter setting” (the dial on the bottom front of the
ImageView ) to zero (the middle mark on dial - opposite
arrow) and view a distant object. (Figure 2)
3. Keep both eyes open at all times.
4. Using your hand, cover the objective (front) lens on the right
side.
5.
Using the center focus wheel (on the bottom of binocular
between the eyepieces), focus on a distant object with fine
detail (e.g., brick wall, tree branches, etc.) until it appears as
sharp as possible.
6. Uncover the objective lens on the right side, cover the other objective lens, then view the same object.
7. Using the “diopter setting” dial, focus the same object being viewed. Caution should be used as over
turning or forcing the dial can cause damage.
8. Your binocular should be adjusted for your eyes. Focus at any far or near distances can now be
attained simply by turning the center focus wheel. Make a note of the diopter setting for your eyes
for future reference.
9
Fig. 2
BINOCULAR INSTRUCTIONS
Y
our Bushnell binocular is a precision instrument designed to provide many years of pleasurable
viewing. This portion of the booklet will help you achieve optimum performance by explaining how
you can adjust the binocular to your eyes, and how to care for this instrument. Read the instructions
carefully before using your binocular.
EYE ADJUSTMENTS
(Figure 1)
How to Adjust For Distance Between Your Eyes
The distance between the eyes, called “interpupillary distance,”
varies from person to person. To achieve perfect alignment of lens to
eye, follow these simple steps.
1. Hold your ImageView in the normal viewing position.
2. Holding the ImageView at the grip areas (dots and ridges on top
and bottom surfaces), carefully slide the left and right sides apart until it is set for your eye spacing
(you will see a singular circular field). If you go too far, simply slide the sides back so they are closer
together. Note the index scale position to help you reset this if someone else uses your ImageView.
How to Adjust For Individual Eye Strength
As individual eyesight varies from one person to another, Bushnell binoculars have a diopter setting feature
which allows you to fine-tune the binocular to your vision. Follow the focusing instructions below for your
ImageView binocular.
8
Fig. 1
11-0718 6LIM.indd 14-15 7/19/04 8:50:25 AM