Operation Manual

3. Open the program PhotoSuite 5
4. Click “Transfer” in the left frame area under “Home Page”
5. Select “Transfer from new device”
6. Under (#1) “Select a device from the list”, click “Dual Mode Camera (8008 VGA)”, then click
“Next” at the bottom of the left frame area.
7. You may now name the group of photos if you wish (#2), or accept the default “Captured (current
date). Note that your photos will also be added to your hard drive in a folder of the same name,
located in C:/My Documents/My Pictures.
8. Click the “Transfer Photos” button (#3).
9. After several seconds, the driver screen will appear, and you will see the “live” image from the
camera’s lens. Disregard this, and click on the bottom rightmost icon (shows a camera pointing
into a computer monitor) to start the download from the ImageView to your computer.
10. When the download is finished, you should see “thumbnail” preview frames showing the photos,
numbered “Img 1”, etc. on the right side frame of the driver window.
11. Next, click “Transfer All” at the bottom of the driver window, if you want to view and edit all of
your photos in PhotoSuite. Or, click on the thumbnail frames to select just the photos you want to
work with (click again to deselect one), and click “Transfer” at the bottom of the driver window.
You are then returned to the PhotoSuite transfer screen, and should see all of your transferred
photos, identified by the date and file number.
12. Click “Next”, then “Done” at the bottom of the left frame area.
13. You may now wish to edit (click Edit & Create, then Edit), or print (click Print & Share, then
Print) your photos. For detailed instructions for using these and other PhotoSuite features, please
refer to “Roxio PhotoSuite Help”, available by selecting the Help menu at the top of your screen.
7
open the CD (open “My Computer” and double click the “ImageView” pencil icon) and click “Install
Driver”. The CD contains the PhotoSuite software, as well as the drivers that will allow your computer
to recognize your camera. Even if you have photo-imaging software on your computer and do not need
the PhotoSuite software, you will still need to install the drivers for the camera.
Follow the on screen instructions. After drivers are successfully installed first, return to the CD install
screen, and click on “Roxio PhotoSuite 5” to install the photo imaging software. If you have questions
about using your ImageView, including the downloading process, help is available at www.bushnell.
com or
call Bushnell customer service at [phone]. For PhotoSuite software technical support,
go to the Roxio website at: www.roxio.com and click “Support”, then select your PhotoSuite version
and search the online knowledge base. Note that PhotoSuite has an extensive Help menu, so be sure to
reference that first.
DOWNLOADING PHOTOS TO YOUR COMPUTER:
1.
Connect the USB cable from the computer
to the camera.
2. You may have a brief wait for the process
as Windows “builds a driver information
database” and confirms that the PC
matches the correct software to the
attached hardware device.
6
11-0718 6LIM.indd 12-13 7/19/04 8:50:25 AM